The Impact of Implementation of Standardized Quality Management Systems on Management of Liabilities in Group Purchasing Organizations

Dominik Zimon, Grzegorz Zimon

Abstract

Purpose: The main purpose of the paper was to determine the impact of an implementation of the quality management system according to ISO 9001 on the improvement of processes related to the management of liabilities to suppliers.

Methodology/Approach: The research covered 38 Polish small trading enterprises operating in two group purchasing organizations. The research period concerned the years 2014-2016. The surveyed enterprises were divided into those that implemented standardized quality management systems (10 organizations) and the ones that do not use such solutions (28 organizations). Next, the analyses were made and the results obtained by enterprises associated in particular groups were compared.

Findings: The obtained results confirm that more effective management of liabilities towards suppliers can be observed in enterprises applying appropriate system procedures. This group includes long-term liabilities and the turnover ratio of short-term liabilities in days achieves lower results than results for enterprises that did not introduce standardized quality management systems.

Research Limitation/implication: Due to a small research sample, the obtained results can only be considered as an introduction to further research and deliberations.

Originality/Value of paper: The considerations discussed in this article concern a relatively rarely discussed subject matter in the literature.

References

Bakker, E., Walker. H. and Harland C., 2006. Organising for collaborative procurement: an initial conceptual framework. Advancing Public-Procurement: Practices, Innovation and Knowledgesharing, PrAcdemics Press, pp.14-44.

Bugdol, M. and Jedynak, P. eds., 2015. Integrated management systems. Cham, Switzerland: Springer.

Burns, L.R. and Lee, J.A., 2008. Hospital purchasing alliances: Utilization, services, and performance. Health Care Management Review, 33(3), pp.7-17. https://doi.org/10.1097/01.HMR.0000324906.04025.33.

Dellana, S. and Kros, J., 2018. ISO 9001 and supply chain quality in the USA. International Journal of Productivity and Performance Management, 67(2), pp.297-317. https://doi.org/10.1108/IJPPM-05-2015-0080.

Domingues, P., Sampaio, P. and Arezes, P.M., 2016. Integrated management systems assessment: a maturity model proposal. Journal of Cleaner Production, 124, pp.164-174. https://doi.org/10.1016/j.jclepro.2016.02.103.

Fonseca, L.M. and Domingues, J.P., 2018. Empirical research of the ISO 9001: 2015 transition process in Portugal: Motivations, benefits, and success factors. Quality Innovation Prosperity, 22(2), pp.16-46. http://dx.doi.org/10.12776/qip.v22i2.1099.

Gabrusewicz, W., 2016. Analiza finansowa przedsiębiorstwa. Teoria i zastosowanie. Warszawa: Polskie Wydawnictwo Ekonomiczne.

Johnsen, T.E., 2018. Purchasing and supply management in an industrial marketing perspective. Industrial Marketing Management, 69, pp.91-97. https://doi.org/10.1016/j.indmarman.2018.01.017.

Kafel, P. and Simon, A., 2017. The Reasons for Decertification of ISO 9001: Financial Aspects. Quality Innovation Prosperity, 21(3), pp.173-184. http://dx.doi.org/10.12776/qip.v21i3.1024.

Levine, D.I. and Toffel, M.W., 2010. Quality management and job quality: How the ISO 9001 standard for quality management systems affects employees and employers. Management Science, 56(6), pp.978-996. http://dx.doi.org/10.1287/mnsc.1100.1159.

Nollet J. and Beaulieu, M., 2005. Should an organization join a purchasing group?. Supply Chain Management: An International Journal, 10(1), pp.11-17. https://doi.org/10.1108/13598540510578333.

Nollet, J. and Beaulieu, M., 2003. The development of group purchasing: an empirical study in the healthcare sector. Journal of Purchasing and Supply Management, 9, pp.3-10. https://doi.org/10.1016/S0969-7012(02)00034-5.

Nowak, E., 2017. Analiza sprawozdań finansowych. Warszawa: Polskie Wydawnictwo Ekonomiczne.

Psomas, E.L., Kafetzopoulos, D.P. and Fotopoulos, C.V., 2012. Developing and validating a measurement instrument of ISO 9001 effectiveness in food manufacturing SMEs. Journal of Manufacturing Technology Management, 24(1), pp.52-77. https://doi.org/10.1108/17410381311287481.

Schotanus, F. and Telgen, J., 2007. Developing a typology of organisational forms of cooperative purchasing. Journal of Purchasing & SupplyManagement, 13, pp.53-68. https://doi.org/10.1016/j.pursup.2007.03.002.

Tella, E. and Virolainen, V.M., 2005. Motives behind purchasing consortia. International Journal of Production Economics, 93, pp.161-168. https://doi.org/10.1016/j.ijpe.2004.06.014.

Zgodavova, K., Kisela, M. and Sutoova, A., 2016. Intelligent approaches for an organisation’s management system change. The TQM Journal, 28(5), pp.760-773. https://doi.org/10.1108/TQM-10-2015-0130.

Zimon, D., 2017. Quality Management Systems' impact on the functioning of distribution channels in the FMCG market. Quality Access to Success, 18(156), pp.52-54.

Zimon, G., 2018a. Influence of group purchasing organizations on financial situation of Polish SMEs. Oeconomia Copernicana, 9(1), pp.87-104. https://doi.org/10.24136/oc.2018.005.

Zimon, G., 2018b. Strategie zarządzania zobowiązaniami w grupach zakupowych. Prace Naukowe Uniwersytetu Ekonomicznego we Wrocławiu, 513, pp.468-477.

Zizka, M., Budaj, P. and Madzík, P., 2016. The adequacy of an organisation's measurement system in quality management. Quality Access to Success, 17(155), pp.60-62.

Authors

Dominik Zimon
zdomin@prz.edu.pl (Primary Contact)
Grzegorz Zimon
Zimon, D., & Zimon, G. (2019). The Impact of Implementation of Standardized Quality Management Systems on Management of Liabilities in Group Purchasing Organizations. Quality Innovation Prosperity, 23(1), 60–73. https://doi.org/10.12776/qip.v23i1.1210
Copyright and license info is not available

Article Details

Improving Team Collaboration in Patient Transfer Processes by Co-Workers’ Perceptions and Suggestions

Lilly-Mari Sten, Pernilla Ingelsson, Ingela Bäckström, Marie Häggström
Abstract View : 862
Download :363

Modelling of an Additive 3D-Printing Process Based on Design of Experiments Methodology

José Alberto Eguren, Aritz Esnaola, Gorka Unzueta
Abstract View : 1260
Download :736