DIFFUSIVE AND DISPLACIVE PHASE TRANSFORMATIONS UNDER HIGH PRESSURE TORSION

Boris Straumal, Askar Kilmametov, Andrey Mazilkin, Olga Kogtenkova, Brigitte Baretzky, Anna Korneva, Pawel Zięba

Abstract


Severe plastic deformation (SPD) can induce various phase transformations. After a certain strain, the dynamic equilibrium establishes between defects production by an external force and their relaxation (annihilation). The grain size, hardness, phase composition etc. in this steady-state does not depend on the initial state of a material and is, therefore, equifinal. In this review we discuss the competition between precipitation and dissolution of precipitates, amorphization and (nano)crystallization, SPD-induced accelerated mass-transfer, allotropic and martensitic transitions and formation of grain boundary phases.


Keywords


severe plastic deformation; phase transformations; thermodynamics; kinetics

Full Text:

PDF

References


B. B. Straumal, A.A. Mazilkin, B. Baretzky, E. Rabkin, R.Z. Valiev: Materials Transactions, Vol. 53, 2012, p. 63–71, https://doi.org/10.2320/matertrans.MD201111

X. Sauvage, A. Chbihi, X. Quelennec: Journal of Physics, Vol. 240,2010, p. 012003, https://doi.org/

B. Straumal, A. Korneva, P. Zięba: Archives of Civil and Mechanical Engineering, Vol. 14, 2014, p. 242–249, https://doi.org/10.1016/j.acme.2013.07.002

E. I. Teitel', L. S. Metlov, D. V. Gunderov, A. V. Korznikov: Physics of Metals and Metallography13, 2012, p. 1162–1168, https://doi.org/

B. B. Straumal et al.: International Journal of Materials Research, Vol. 106, 2015, p. 657–664, https://doi.org/10.3139/146.111215

B. B. Straumal, A. R. Kilmametov, A. Korneva, A. A. Mazilkin, P. B. Straumal, P. Zięba, B. Baretzky: Journal of Alloys and Compounds, Vol. 707, 2017, p. 20–26, https://doi.org/10.1016/j.jallcom.2016.12.057

B. B. Straumal et al.: Materials Letters, Vol. 145, 2015, p. 63–66, https://doi.org/10.1016/j.matlet.2015.01.041

B. B. Straumal, A. A. Mazilkin, S. G. Protasova, D. V. Gunderov, G. A. López, B. Baretzky: Materials Letters, Vol. 161, 2015, p. 735–739, https://doi.org/10.1016/j.matlet.2015.09.076

C. Borchers et al.: Acta Materialia, Vol. 97, 2015, p. 207–215, https://doi.org/ 10.1016/j.actamat.2015.06.049

S. Lee, Z. Horita: Materials Transactions , Vol. 53, 2012, p. 38–45, https://doi.org/10.2320/matertrans.MD201109

K. Edalati, S. Toh, M. Watanabe, Z. Horita: Scripta Materialia, Vol. 66, 2012, p. 386–389, https://doi.org/10.1016/j.scriptamat.2011.11.039

J. M. Cubero-Sesin, Z. Horita: Materials Transactions, Vol. 53, 2012, p. 46–55, https://doi.org/10.2320/matertrans.MD201110

K. Bryła, J. Morgiel, M. Faryna, K. Edalati, Z. Horita: Materials Letters, Vol. 212, 2018, p. 323–326, https://doi.org/10.1016/j.matlet.2017.10.113

A. A. Mazilkin, B. B. Straumal, S. G. Protasova, O. A. Kogtenkova, R. Z. Valiev: Physics of Solid State, Vol. 49, 2007, p. 868–873, https://doi.org/10.1134/S1063783407050113

B. B. Straumal et al.: Journbal of Materials Sciencs , Vol. 46, 2011, p. 4243–4247, https://doi.org/10.1007/s10853-011-5257-6

K. Edalati et al.: Materials Transactions, Vol. 57, 2016, p. 533–538, https://doi.org/ 10.2320/matertrans.M2015374

K. Edalati, Y. Hashiguchi, P.H.R. Pereira, Z. Horita, T. G. Langdon: Materials Science and Engineering A, Vol. 714, 2018, p. 167–171, https://doi.org/10.1016/j.msea.2017.12.095

K. Edalati, Z. Horita: Acta Materialia, Vol. 59, 2011, p. 6831–6836, https://doi.org/ 10.1016/j.actamat.2011.07.046

K. Edalati, Z. Horita, T. Furuta, S. Kuramoto: Materials Science and Engineering A, Vol. 559, 2013, p. 506–509, https://doi.org/10.1016/j.msea.2012.08.132

A.A. Mazilkin, O.A. Kogtenkova, B.B. Straumal, R.Z. Valiev, B. Baretzky: Defect and Diffusion Forum, Vol. 237–240, 2005, p. 739–744, https://doi.org/10.4028/www.scientific.net/DDF.237.739

A. A. Mazilkin et al.: Defect and Diffusion Forum, Vol. 249, 2006, p. 155–160, https://doi.org/10.4028/www.scientific.net/DDF.249.155

R. Kulagin, Y. Beygelzimer, Yu. Ivanisenko, A. Mazilkin, B. Straumal, H. Hahn: Materials Letters, Vol. 222, 2018, p. 172–175, https://doi.org/10.1016/j.matlet.2018.03.200

R. Z. Valiev, R. K. Islamgaliev, I. V. Alexandrov: Progress in Materials Science, Vol. 45, 2000, p. 103–189, https://doi.org/10.1016/S0079-6425(99)00007-9

K. Bryła et al.: Materials Science and Engineering A, Vol. 737, 2018, p. 318–327, https://doi.org/10.1016/j.msea.2018.09.070

E. A. Lukyanova et al.: Russian Metallurgy (Metally), Vol. 11, 2017, p. 912–921, https://doi.org/10.1134/S0036029517110088

P. Kral et al.: Materials Science and Engineering A, Vol. 723, 2018, p. 287–295, https://doi.org/10.1016/j.msea.2018.03.059

S. Sabbaghianrad, S.A. Torbati-Sarraf, T.G. Langdon: Materials Science and Engineering A, Vol. 712, 2018, p. 373–379, https://doi.org/ 0.1016/j.msea.2017.11.090

K. Tirsatine et al.: Journal of Alloys and Compounds, Vol. 753, 2018, p. 46–53, https://doi.org/10.1016/j.jallcom.2018.04.194

M. Y. Alawadhi, S. Sabbaghianrad, Y. Huanga, T.G. Langdon: Journal of Materials Research and Technology, Vol. 6, 2017, p. 369–377, https://doi.org/10.1016/j.jmrt.2017.05.005

M. Azabou et al.: The International Journal of Advanced Manufacturing Technology, Vol. 87, 2016, p. 981–987, https://doi.org/10.1007/s00170-016-8551-2

A. A. Mazilkin et al.: Acta Materialia, Vol. 54, 2006, p. 3933–3939, https://doi.org/10.1016/j.actamat.2006.04.025

B. Straumal et al.: Materials Letters, Vol. 118, 2014, p. 111–114, https://doi.org/10.1016/j.matlet.2013.12.042

Y. Huang, S. Sabbaghianrad, A.I. Almazrouee, K.J. Al-Fadhalah, S.N. Alhajeri, T.G. Langdon: Materials Science and Engineering A, Vol. 656, 2016, p. 55–66, https://doi.org/10.1016/j.msea.2016.01.027

N. Lugo, N. Llorca, J.M. Cabrera, Z. Horita: Materials Science and Engineering A, Vol. 477, 2008, p. 366–371, https://doi.org/10.1016/j.msea.2016.01.027

J. Čížek et al.: Acta Materialia, Vol. 59, 2011, p. 2322–2329, https://doi.org/10.1016/j.actamat.2010.12.028

X. Z. Liao, Y. H. Zhao, Y. T. Zhu, R. Z. Valiev, D. V. Gunderov: Journal of Applied Physics, Vol. 96, 2004, p. 636–640, https://doi.org/10.1063/1.1757035

M. Shamsborhan, M. Ebrahimi: Journal of Alloys and Compounds, Vol. 682, 2016, p. 552–556, https://doi.org/ 10.1016/j.jallcom.2016.05.012

C. L. Tang, H. Li, S. Y. Li: The Transactions of Nonferrous Metals Society of China, Vol. 26, 2016, p. 1736−1744, https://doi.org/10.1016/S1003-6326(16)64286-3

Z. N. Mao et al.: Materials Science and Engineering A, Vol. 674, 2016, p. 186–192, https://doi.org/10.1016/j.msea.2016.07.050

E. Bagherpour, F. Qods, R. Ebrahimi, H. Miyamoto: Materials Science and Engineering A, Vol. 674, 2016, p. 221–231, https://doi.org/10.1016/j.msea.2016.08.001

E. Bagherpour, F. Qods, R. Ebrahimi, H. Miyamoto: Materials Science and Engineering A, Vol. 666, 2016, p. 324–338, https://doi.org/10.1016/j.msea.2016.04.080

P.C. Yadav, A. Sinhal, S. Sahu, A. Roy, S. Shekhar: Journal of Materials Engineering and Performance, Vol. 25, 2016, p. 2604–2614, https://doi.org/10.1007/s11665-016-2142-0

C. Xu, Z. Horita, T.G. Langdon: Materials Science and Engineering A, Vol. 528, 2011, p. 6059–6065, https://doi.org/10.1016/j.msea.2011.04.017

K. Edalati, Z. Horita: Materials Science and Engineering A, Vol. 528, 2011, p. 7514– 7523, https://doi.org/10.1016/j.msea.2011.06.080

A. V. Korznikov, Y. V. Ivanisenko, D. V. Laptionok, I. M. Safarov, V. P. Pilyugin, R. Z. Valiev: Nanostructured Materials, Vol. 4, 1994, p. 159–167, https://doi.org/10.1007/s11665-016-2142-0

Y. Ivanisenko, W. Lojkowski, R. Z. Valiev, H.-J. Fecht: Acta Materialia, Vol. 51, 2003, p. 5555–5570, https://doi.org/ 10.1016/S1359-6454(03)00419-1

Y. Ivanisenko, R.K. Wunderlich, R.Z. Valiev, H.-J. Fecht: Scripta Materialia, Vol. 49, 2003, p. 947–952, https://doi.org/10.1016/S1359-6462(03)00478-0

J. Zrnik, R. Pippan, S. Scheriau, L. Kraus, M. Fujda: Journal of Materials Science 45, 2010, p. 4822–4826, https://doi.org/10.1007/s10853-010-4482-8

S. Bayramoglu, C. H. Gür, I. V. Alexandrov, M. M. Abramova: Materials Science and Engineering A, Vol. 527, 2010, p. 927–933, https://doi.org/10.1016/j.msea.2009.09.006

J. Ningn et al.: Materials Science and Engineering A, Vol. 581, 2013, p. 8–15, https://doi.org/10.1016/j.msea.2013.05.008

Y. Todaka, Y. Miki, M. Umemoto, C. Wang, K. Tsuchiya: Materials Science Forum, Vol. 584–586, 2008, p. 597–604, https://doi.org/10.4028/www.scientific.net/DSF.584.597

X. Z. Liao et al.: Applied Physics Letters, Vol. 88, 2006, p. 021909, https://doi.org/10.1063/1.2159088

R. Pippan, S. Scheriau, A. Taylor, M. Hafok, A. Hohenwarter, A. Bachmaier: Annual Review of Materials Research, Vol. 40, 2010, p. 319–343, https://doi.org/ 10.1146/annurev-matsci-070909-104445

H. Wen, R.K. Islamgaliev, K.M. Nesterov, R.Z. Valiev, E.J. Lavernia: Philosophical Magazine Letters, Vol. 93, 2013, p. 481–489, https://doi.org/10.1080/09500839.2013.805268

K. Edalati et al.: Acta Materialia, Vol. 69, 2014, p. 68–77, https://doi.org/10.1016/j.actamat.2014.01.036

R. Tejedora, K. Edalati, J.A. Benito, Z. Horita, J. M. Cabrera: Materials Science and EngineeringA , Vol. 743, 2019, p. 597–605, https://doi.org/10.1016/j.msea.2018.11.127

I. F. Mohamed et al.: Materials Science and Engineering A, Vol. 704, 2017, p. 112–118, https://doi.org/10.1016/j.msea.2017.07.083

K. Edalati, H. Shao, H. Emami, H. Iwaoka, E. Akiba, Z. Horita: International Journal of Hydrogen Energy, Vol. 41, 2016, p. 8917–8924, https://doi.org/10.1016/j.ijhydene.2016.03.146

M. Isika et al.: Journal of the Mechanical Behavior of Biomedical Materials, Vol. 59, 2016, p. 226–235, https://doi.org/10.1016/j.jmbbm.2015.11.015

M. Isik et al.: Materials Transactions , Vol. 57, 2016, p. 1109–1118, https://doi.org/10.2320/matertrans.M2016052

T. Hongo et al.: Materials Science and Engineering A, Vol. 618, 2014, p. 1–8, https://doi.org/10.1016/j.msea.2014.08.074

K. Edalati, K. Imamura, T. Kiss, Z. Horita: Materials Transactions, Vol. 53, 2012, p. 123–127, https://doi.org/10.2320/matertrans.MD201109

A. Hanna et al.: Journal of Alloys and Compounds, Vol. 778, 2019, p. 61–71, https://doi.org/10.1016/j.jallcom.2018.11.109

Y. I. Bourezg et al.: Materials Science and Engineering A, Vol. 724, 2018, p. 477–485, https://doi.org/10.1016/j.msea.2018.03.114

P. Bazarnik, Y. Huang, M. Lewandowska, T. G. Langdon: Materials Science and Engineering A, Vol. 712, 2018, p. 513–520, https://doi.org/10.1016/j.msea.2017.12.007

D. M. M. Cardona, J. Wongsa-Ngam, H. Jimenez, T. G. Langdon: Journal of Materials Research and Technology, Vol. 6, 2017, p. 355–360, https://doi.org/10.1016/j.jmrt.2017.05.002

S. A. Torbati-Sarraf, S. Sabbaghianrad, R. B. Figueiredo, T. G. Langdon: Journal of Alloys and Compounds, Vol. 712, 2017, p. 185–193, https://doi.org/10.1016/j.jallcom.2017.04.054

M. Diez, H.-E. Kim, V. Serebryany, S. Dobatkin, Y. Estrin: Materials Science and Engineering A, Vol. 612, 2014, p. 287–292, https://doi.org/10.1016/j.msea.2014.06.061

E. A. Lukyanova, N. S. Martynenko, I. Shakhova, A. N. Belyakov, L. L. Rokhlin, S. V. Dobatkin, Y. Z. Estrin: Materials Letters, Vol. 170, 2016, p. 5–9, https://doi.org/10.1016/j.matlet.2016.01.106

N. S. Martynenko, E. A. Luk’yanova, M. M. Morozov, V. S. Yusupov, S. V. Dobatkin, Y. Z. Estrin: Metal Science and Heat Treatment, Vol. 60, 2018, p. 253–258, https://doi.org/10.1007/s11041-018-0269-3

C. C. Koch, T. G. Langdon, E. J. Lavernia: Metallurgical and Materials Transactions A, Vol. 48, 2017, p. 5181–5199, https://doi.org/s11661-017-4298-0

A. A. Mazilkin, B. B. Straumal, M. V. Borodachenkova, R. Z. Valiev, O. A. Kogtenkova, B. Baretzky: Materials Letters, Vol. 84, 2012, p. 63–65, https://doi.org/10.1016/j.matlet.2012.06.026

B. B. Straumal et al.: Acta Materialia, Vol. 52, 2004, p. 4469–4478, https://doi.org/10.1016/j.actamat.2004.06.006

Y. Ito, K. Edalati, Z. Horita: Materials Science and Engineering A, Vol. 679, 2017, p. 428–434, https://doi.org/ 0.1016/j.msea.2016.10.066

X. Sauvage, M. Yu. Murashkin, B. B. Straumal, E. Bobruk, R. Z. Valiev: Advanced Engineering Materials , Vol. 17, 2015, p. 1821–1827, https://doi.org/10.1002/adem.201500151

V. D. Sitdikov, P. S. Chizhov, M. Yu. Murashkin, R. Z. Valiev: Reviews on Advanced Materials Science, Vol. 47, 2016, p. 59–65

A. Korneva et al.: Inżynieria Materiałowa , Vol. 34, 2013, p. 306–309, https://doi.org/10.15199/34.2013.4.6

B. B. Straumal et al.: Materials Letters, Vol. 98, 2013, p. 217–221, https://doi.org/10.1016/j.matlet.2013.02.058

L. von Bertalanffy, Science, Vol. 111, 1950, p. 23–29, https://doi.org/10.1126/science.111.2872.23

B. B. Straumal et al.: Journal of Materials Science, Vol. 47, 2012, p. 360–367, https://doi.org/10.1007/s10853-011-5805-0

B. B. Straumal et al.: JETP Letters , Vol. 100, 2014, p. 376–379, https://doi.org/10.1134/S0021364014180106

A. Korneva et al.: Materials Letters, Vol. 179, 2016, p. 12–15, https://doi.org/10.1016/j.matlet.2016.05.059

A. Korneva, B. Straumal, A. Kilmametov, G. Cios, P. Bała, P. Zięba: Materials Characterisation , Vol. 118, 2016, p. 411–416, https://doi.org/10.1016/j.matchar.2016.06.019

A. Korneva et al.: IOP Conference Series: Materials Science and Engineering, Vol. 63, 2014, p. 012093, https://doi.org/10.1088/1757-899X/63/1/012093

B.B. Straumal et al.: Materials Letters, Vol. 138, 2015, p. 255–258, https://doi.org/10.1016/j.matlet.2014.10.009

A. Korneva, B. Straumal, A. Kilmametov, R. Chulist, P. Straumal, P. Zięba: Materials Characterisation , Vol. 114, 2016, p. 151–156, https://doi.org/10.1016/j.matchar.2016.02.017

B. B. Straumal, V. Pontikis, A. R. Kilmametov, A. A. Mazilkin, S. V. Dobatkin, B. Baretzky: Acta Materialia, Vol. 122, 2017, p. 60–71, https://doi.org/10.1016/j.actamat.2016.09.024

A. Korneva et al.: Materials , Vol. 12, 2019, p. 447, https://doi.org/10.3390/ma12030447

B. B. Straumal et al.: International Journal of Materials Research , Vol. 110, 2019, p. 608–613, https://doi.org/10.3139/146.111784

G. A. López et al.: Mater. Today: Procs. , Vol. 2S, 2015, p. S747–S750, https://doi.org/10.1016/j.matpr.2015.07.390

B. B. Straumal et al.: Acta Materialia, Vol. 125, 2017, p. 274–285, https://doi.org/10.1016/j.actamat.2016.12.003

G. Martin: Physical Review B, Vol. 30, 1984, p. 1424–1436, https://doi.org/10.1103/PhysRevB.30.1424

B. B. Straumal et al.: Kovove Materialy-Metallic Materials , Vol. 49, 2011, p. 17–22, https://doi.org/10.4149/km-2011-1-17

A. A. Mazilkin et al.: Journal of Materials Science, Vol. 46, 2011, p. 4336–4342, https://doi.org/10.1007/s10853-011-5304-3

U. R. Kattner: Journal of Materials (JOM), Vol. 49, 1997, p. 14–19, https://doi.org/10.1007/s11837-997-0024-5

N. Mattern, U. Kühn, A. Gebert, A. Schoeps, T. Gemminga, L. Schultz: Materials Science and EngineeringA, Vol. 449/451, 2007, p. 207–210, https://doi.org/ 0.1016/j.msea.2006.02.269

S. D. Prokoshkin et al.: Acta Materialia, Vol. 53, 2005, p. 2703–2714, https://doi.org/ 0.1016/j.actamat.2005.02.032

A. V. Sergueeva, C. Song, R. Z. Valiev, A. K. Mukherjee: Materials Science and Engineering A, Vol. 339, 2003, p. 159–165, https://doi.org/10.1016/S0921-5093(02)00122-3

X. Sauvage, L. Renaud, B. Deconihout, D. Blavette, D. H. Ping, K. Hono: Acta Materalia, Vol. 49, 2001, p. 389–394, https://doi.org/10.1016/S1359-6454(00)00338-4

T. Miyazaki et al.: Journal of Materials Science, Vol. 46, 2011, p. 4296–4301, https://doi.org/10.1007/s10853-010-5240-7

V.V. Stolyarov, D.V. Gunderov, A.G. Popov, V.S. Gaviko, A.S.Ermolenko: Journal of Alloys and Compounds, Vol. 281, 1998, p. 69–71, https://doi.org/10.1016/S0925-8388(98)00774-9

Y. Matsuura, S. Hirosawa, H. Yamamoto, S. Fujimira, M. Sagawa, K. Osamura: Japanese Journal of Applied Physics Part 2 – Letters, Vol. 24, 1985, p. L635– L637, https://doi.org/10.1143/JJAP.24.L635

Á. Révész, S. Hóbor, J. L. Lábár, A. P. Zhilyaev, Zs. Kovácz: Journal of Applied Physics, Vol. 100, 2006, p. 103522, https://doi.org/10.1063/1.2388868

A. M. Glezer, M. R. Plotnikova, A. V. Shalimova, S. V. Dobatkin: Bulletin of the Russian Academy of Sciences. Physics, Vol. 73, 2009, p. 1233–1236, https://doi.org/10.3103/S1062873809090123

S. Hóbor, Á. Révész, A. P. Zhilyaev, Zs. Kovácz: Reviews of Advanced Materials Science, Vol. 18, 2008, p. 590–592

Zs. Kovács, P. Henits, A. P. Zhilyaev, Á. Révész: Scripta Materialia, Vol. 54, 2006, p. 1733–1737, https://doi.org/10.1016/j.scriptamat.2006.02.004

G. E. Abrosimova et al.: Journal of Metastable and Nanocrystalline Materials, Vol. 24, 2005, p. 69–72, https://doi.org/10.4028/www.scientific.net/JMNM.24-25.69

Á. Révész, E. Schafler, Zs. Kovács: Applied Physics Letters, Vol. 92, 2008, p. 011910, https://doi.org/10.1063/1.3064125

S. Hóbor, Zs. Kovács, A. P. Zhilyaev, L. K. Varga, P. J. Szabó, Á. Révész: Journal of Physics, Vol. 240, 2010, p. 012153, https://doi.org/10.1088/1742-6596/240/1/012153

S. Hóbor et al.: Journal of Applied Physics, Vol. 104, 2008, p. 033525, https://doi.org/10.1063/1.2964115

P. Henits, Á. Révész, A. P. Zhilyaev, Zs. Kovács: Journal of Alloys and Compounds, Vol. 461, 2008, p. 195–199, https://doi.org/10.1016/j.jallcom.2007.07.049

Zs. Kovács, P. Henits, A.P. Zhilyaev, N.Q. Chinh, Á. Révész: Materials Science Forum, Vol. 519-521, 2006, p. 1329–1334, https://doi.org/10.4028/www.scientific.net/DDF.519.1329

B. Oberdorfer et al.: Physical Review Letters, Vol. 105, 2010, p. 146101, https://doi.org/10.1103/PhysRevLett.105.146101

J. Čížek, O. Melikhova, Z. Barnovská, I. Procházka, R. K. Islamgaliev: Journal of Physics: Conference Series, Vol. 443, 2013, p. 012008, https://doi.org/10.1088/1742-6596/443/1/012008

B. B. Straumal, O. A. Kogtenkova, R. Z. Valiev, P. Zięba, B. Baretzky: Diffusion Fundamentals, Vol. 5, 2015, p. 95–108, https://doi.org/10.4028/www.scientific.net/DF.5.95

T. Ungar, E. Schafler, P. Hanak, S. Bernstorff, M. Zehetbauer: Materials Science and EngineeringA, Vol. 462, 2007, p. 398–401, https://doi.org/10.1016/j.msea.2006.03.156

T. Ungár, E. Schafler, P. Hanák, S. Bernstorff, M. Zehetbauer: Zeitschrift für Metallkunde, Vol. 96, 2005, p. 578–583, https://doi.org/10.3139/146.101073

C. A. Mackliet: Physical Review, Vol. 109, 1958, p. 1964–1970, https://doi.org/

S. Fujikawa, K.I. Hirano, in: Proc. of Yamada Vth Conf. on Point Defects, Defect Interactions in Metals, J.I. Takamura, M. Doyama, M. Kiritani (Eds.) University of Tokyo Press, 1982, p. 554–558.

D. A. Molodov, B. B. Straumal, L. S. Shvindlerman: Scripta Metallurgica, Vol. 18, 1984, p. 207–211, https://doi.org/10.1016/0036-9748(84)90509-X

B. B. Straumal, L. M. Klinger, L. S. Shvindlerman: Scripta Metallurgica, Vol. 17, 1983, p. 275–279, https://doi.org/10.1016/0036-9748(83)90156-4

B. B. Straumal et al.: Philosophical Magazine Letters, Vol. 89, 2009, p. 649–654, https://doi.org/10.1080/09500830903246268

B. B. Straumal et al.: Materials Letters, Vol. 81, 2012, p. 225–228, https://doi.org/10.1016/j/matlet.2012.04.153

B. B. Straumal, A. S. Gornakova, O. B. Fabrichnaya, M. J. Kriegel, A. A. Mazilkin, B. Baretzky, A. M. Gusak, S. V. Dobatkin: High Temp. Mater. Proc. , Vol. 31, 2012, p. 339–350, https://doi.org/10.1515/htmp-2012-0057

A. Kilmametov et al.: Scripta Materialia, Vol. 136, 2017, p. 46–49, https://doi.org/10.1016/j.scriptamat.2017.04.010

A. Kilmametov et al.: Acta Materialia, Vol. 144, 2018, p. 337–351, https://doi.org/10.1016/j.actamat.2017.10.051

B. B. Straumal et al.: Journal of Alloys and Compounds, Vol. 735, 2018, p. 2281–2286, https://doi.org/10.1016/j.jallcom.2017.11.317

A. R. Kilmametov, Yu. Ivanisenko, B. B. Straumal, A. S. Gornakova, A. A. Mazilkin, H. Hahn: Metals, Vol. 8, 2018, p. 1–12, https://doi.org/10.3390/met8010001

A. S. Gornakova et al.: Journal of Applied Physics , Vol. 125, 2019, p. 082522, https://doi.org/10.1063/1.5053937

B. B. Straumal et al.: Materials, Vol. 12, 2019, p. 426, https://doi.org/10.3390/ma12030426

B. B. Straumal et al.: Advanced Engineering Materials , Vol. 17, 2015, p. 1835–1841, https://doi.org/10.1002/adem.201500143

M. J. Kriegel et al.: Adv. Eng.Mater. , Vol. 20, 2018, p. 1700933, https://doi.org/10.1002/adem.201700933

B. Chon et al.: Scripta Materialia, Vol. 157, 2018, p. 120–123, https://doi.org/10.1016/j.scriptamat.2018.08.011

Y. Ikoma, K. Kumano, K. Edalati, M. R. McCartney, D. J. Smith, Z. Horita: Materials Characterization, Vol. 132, 2017, p. 132–138, https://doi.org/10.1016/j.matchar.2017.08.011

Y. Fukushima, Y. Ikoma, K. Edalati, B. Chon, D. J. Smith, Z. Horita: Materials Characterization, Vol. 129, 2017, p. 163–168, https://doi.org/10.1016/j.matchar.2017.04.025

Y. Qi, A. Kosinova, A. R. Kilmametov, B. B. Straumal, E. Rabkin: Materials Characterization, Vol. 145, 2018, p. 389–401, https://doi.org/10.1016/j.matchar.2018.09.001

K. Edalati, I. Fujita, X. Sauvage, M. Arita, Z. Horita: Journal of Alloys and Compounds, Vol. 779, 2019, p. 394–398, https://doi.org/10.1016/j.jallcom.2018.11.086

K. Edalati, Q. Wang, H. Razavi-Khosroshahi, H. Emami, M. Fuji, Z. Horita: Scripta Materialia, Vol. 162, 2019, p. 341–344, https://doi.org/10.1016/j.scriptamat.2018.11.044

H. Razavi-Khosroshahi, K. Edalati, M. Arita, Z. Horita, M. Fuji: Scripta Materialia, Vol. 124, 2016, p. 59–62, https://doi.org/10.1016/j.scriptamat.2016.06.022

W. Zhong, D. Venderbilt, K.M. Rabe: Physical Review Letters, Vol. 73, 1994, p. 1861–1864, https://doi.org/10.1103/PhysRevLett.73.1861

T. Ishidate, S. Abe, H. Takahashi, N. Mori: Physical Review Letters, Vol. 78, 1997, p. 2397–2400, https://doi.org/ 10.1103/PhysRevLett.78.2397

S. A. Hayward, E. K. H. Salje: Journal of Physics: Condensed Matter, Vol. 14, 2002, p. L599–L604, https://doi.org/10.1088/0953-8984/14/36/101

J. J. Wang, P. P. Wu, X. Q. Ma, L. Q. Chen: Journal of Applied Physics, Vol. 108, 2010, p. 114105, https://doi.org/10.1063/1.3504194

U. D. Venkateswaran, V. M. Naik, R. Naik: Physical Review B, Vol. 58, 1998, p. 14256–14260, https://doi.org/10.1103/PhysRevB.58.14256

K. Edalati et al.: Materials Research Letters, Vol. 3, 2015, p. 216–221, https://doi.org/10.1080/21663831.2015.1065454

R. C. Garvie, R. H. J. Hannink, R. T. Pascoe: Nature, Vol. 258, 1975, p. 703–704, https://doi.org/10.1038/258703a0

R. H. J. Hannink, P. M. Kelly, B. C. Muddle: Journal of American Ceramic Society, Vol. 83, 2000, p. 461–487, https://doi.org/10.1111/j.1151-2916.2000.tb01221.x

J. M. Leger, P. E. Tomaszewski, A. Atouf, A. S. Pereira: Physical Review B, Vol. 47, 1993, p. 14075–14083, https://doi.org/ 10.1103/PhysRevB.47.14075

K. Edalati, S. Toh, Y. Ikoma, Z. Horita: Scripta Materialia, Vol. 65, 2011, p. 974–977, https://doi.org/10.1016/j.scriptamat.2011.08.024

E. I. Rabkin, L. S. Shvindlerman, B. B. Straumal: International Journal of Modern Physics B, Vol. 5, 1991, p. 2989–3028, https://doi.org/10.1142/S0217979291001176

B. B. Straumal, O. I. Noskovich, V. N. Semenov, L. S. Shvindlerman, W. Gust, B. Predel: Acta Metallurgica et Materialia, Vol. 40, 1992, p. 795–801, https://doi.org/10.1016/0956-7151(92)90021-6

B. B. Straumal, W. Gust, T. Watanabe: Materials Science Forum, Vol. 294/296, 1999, p. 411–414, https://doi.org/10.4028/www.scientific.net/DDF.294.411

B. B. Straumal et al.: Reviews of Advanced Materials Science, Vol. 38, 2014, p. 17–28

A. B. Straumal, K. V. Tsoi, I. A. Mazilkin, A. N. Nekrasov, K. Bryła: Archives of Metallurgy and Materials, 64, 2019, p. 869–873, https://doi.org/10.24425/amm.2019.129463

L.-S. Chang, B.B. Straumal, E. Rabkin, W. Gust, F. Sommer: Journal of Phase Equilibria, Vol. 18, 1997, p. 128–135, https://doi.org/10.1007/BF02665694

L. S. Chang, E. Rabkin, B. Straumal, P. Lejcek, S. Hofmann, W. Gust: Scripta Materialia, Vol. 37, 1997, p. 729–735, https://doi.org/10.1016/S1359-6462(97)00171-1

L. S. Chang, E. Rabkin, B. B. Straumal, S. Hoffmann, B. Baretzky, W. Gust: Defect and Diffusion Forum, Vol. 156, 1998, p. 135–146, https://doi.org/10.4028/www.scientific.net/DDF.156.135

B. B. Straumal, P. Zięba, W. Gust: International Journal of Inorganic Materials, Vol. 3, 2001, p. 1113–1115, https://doi.org/10.1016/S1466-6049(01)00108-8

B. B. Straumal, A. O. Rodin, A. E. Shotanov, A. B. Straumal, O. A. Kogtenkova, B. Baretzky: Defect and Diffusion Forum, Vol. 333, 2013, p. 175–192, https://doi.org/10.4028/www.scientific.net/DDF.333.175

B. B. Straumal, A. A. Mazilkin, S. G. Protasova, G. Schütz, A. B. Straumal, B. Baretzky: Journal of Materials Engineering and Performance, Vol. 25, 2016, p. 3303–3309, https://doi.org/10.1007/s11665-015-1872-8

B. B. Straumal, A. A. Mazilkin, B. Baretzky: Current Opinion in Solid State & Materials Science, Vol. 20, 2016, p. 247–256, https://doi.org/10.1016/j.cossms.2016.05.006

B. Straumal et al.: Acta Materialia, Vol. 56, 2008, p. 6123–6131, https://doi.org/10.1016/j.actamat.2008.08.021

O. A. Kogtenkova et al.: Journal of Materials Science, Vol. 47, 2012, p. 8367–8371, https://doi.org/10.1007/s10853-012-6786-3

O. A. Kogtenkova, B. B. Straumal, S. G Protasova, A. S. Gornakova, P. Zięba, T. Czeppe: JETP Letters, Vol. 96, 2012, p. 380–384, https://doi.org/10.1134/S0021364012180063

O. A. Kogtenkova, P. Zieba, T. Czeppe, L. Lityn’ska-Dobrzynska, B.B. Straumal, A.N. Nekrasov: Bulletin of the Russian Academy of Sciences: Physics, Vol. 77, 2013, p. 1386–1390, https://doi.org/10.3103/S1062873813110166

K. Higashi, T. G. Nieh, M. Mabuchi, J. Wadsworth: Scripta Metallurgica et Materialia, Vol. 32, 1995, p. 1079–1084, https://doi.org/10.1016/0956-716X(94)00003-Z

Y. Takayama, T. Tozawa, H. Kato: Acta Materialia, Vol. 47, 1999, p. 1263–1270, https://doi.org/10.1016/S1359-6454(98)00416-9

H. Iwasaki, T. Mori, M. Mabuchi, K. Higashi: Acta Materialia, Vol. 46, 1998, p. 6351–6360, https://doi.org/10.1016/S1359-6454(98)00330-9

B. Baudelet, M. C. Dang, F. Bordeaux: Scripta Metallurgica et Materialia, Vol. 26, 1992, p. 573–578, https://doi.org/10.1016/0956-716X(92)90286-N

B. B. Straumal et al.: Materials Science and Engineering A, Vol. 503, 2009, p. 185–189, https://doi.org/10.1016/j.msea.2008.03.052

B. B. Straumal et al.: Defect and Diffusion Forum, Vol. 309–310, 2011, p. 51–62, https://doi.org/10.4028/www.scientific.net/DDF.309.319

B. B. Straumal et al.: Advanced Engineering Materials, Vol. 13, 2011, p. 463–469, https://doi.org/10.1002/adem. 201000312

Yu. Ivanisenko, X. Sauvage, A. Mazilkin, A. Kilmametov, J.A. Beach, B.B. Straumal: Advanced Engineering Materials, Vol. 20, 2018, p. 1800443, https://doi.org/10.1002/adem.201800443

B. Straumal et al.: Acta Materialia, Vol. 56, 2008, p. 6123–6131, https://doi.org/10.1016/j.actamat.2008.08.021

R. Z. Valiev, M. Yu. Murashkin, B. B. Straumal: Materials Science Forum, Vol. 633-634, 2009, p. 321–332, https://doi.org/10.4028/www.scientific.net/DSF.633.321

R. Z. Valiev, M. Y. Murashkin, A. Kilmametov, B. B. Straumal, N. Q. Chinh, T. G. Langdon: Journal of Materials Science, Vol. 45, 2010, p. 4718–4724, https://doi.org/10.1007/s10853-010-4588-z

N. Q. Chinh, T. Csanádi, J. Gubicza, R. Z. Valiev, B. B. Straumal, T. G. Langdon: Materials Science Forum, Vol. 667-669, 2011, p. 677–682, https://doi.org/10.4028/www.scientific.net/DSF.667.677

O. A. Kogtenkova et al.: Journal of Materials Science, Vol. 48, 2013, p. 4758–4765, https://doi.org/10.1007/s10853-013-7266-0

B. B. Straumal, X. Sauvage, B. Baretzky, A. A. Mazilkin, R. Z. Valiev: Scripta Materialia, Vol. 70, 2014, p. 59–62, https://doi.org/10.1016/j.scriptamat.2013.09.019

N. Q. Chinh et al.: Advanced Engineering Materials, Vol. 16, 2014, p. 1000–1009, https://doi.org/10.1002/adem.201300450

B. B. Straumal, A. A. Mazilkin, X. Sauvage, R. Z. Valiev, A. B. Straumal, A. M. Gusak: Russian Journal of Non-Ferrous Metals, Vol. 56, 2015, p. 44–51, https://doi.org/10.3103/S1067821215010198

N. Q. Chinh et al.: Materials Science and Engineering A, Vol. 543, 2012, p. 117–120, https://doi.org/10.1016/j.msea.2012.02.056




DOI: http://dx.doi.org/10.12776/ams.v25i4.1368

Refbacks

  • There are currently no refbacks.


SJR 2014: 0.502 - Q2 Metals and Alloys, 39./125.

SJR 2013: 0.309 - Q2 Metals and Alloys, 59./121.       

SJR 2012: 0.325 - Q2 Metals and Alloys, 33./90. (A)

SJR 2011: 0.363 - Q2 Metals and Alloys, 29./90. (A)

SJR 2010: 0.151 - Q3 Metals and Alloys, 68./90. (B)

SJR 2009: 0 - Q4 Metals and Alloys, 89./90. (C - according to the Slovak Journal Quality Criteria)

Indexed in: SCOPUS, Web of Science Core Collection, CROSSREF, GOOGLE SCHOLAR,CAMBRIDGE SCIENTIFIC ABSTRACTS, Committee on Publication Ethics (COPE)

IČO 00 397 610

EV 5174/15

p-ISSN 1335-1532, e-ISSN 1338-1156