CORROSION BEHAVIOUR OF AISI 460LI SUPER-FERRITIC STAINLESS STEEL

Andrea Di Schino

Abstract


Following nickel and molybdenum significant price increase, nowadays the stainless steel market is moving toward an increasing use of ferritic stainless steel instead of austenitic stainless and therefore to the development of advanced ferritic stainless steels grades aimed to substitute the more expensive austenitic materials in all applications allowing it. Super-ferritic stainless steels are higher chromium (Cr) and molybdenum (Mo) steels with properties similar to those of standard ferritic alloys. Such elements increase high temperature and corrosion resistance in strong environment. This paper deal about the corrosion resistance of super-ferritic stainless steels with a Cr content ranging from 21% to 24%.


Keywords


Stainless steels; corrosion resistance; microstructure

Full Text:

PDF

References


P. Marshall: Austenitic stainless steels: Microstructure and Mechanical Properties, Elsevier Applied Science Publisher, 1984

L. Viet, J. Hye-Jin: Metals, Vol.8, 2018, 815, https://doi.org/10.3390/met8100815

C. Xingrun, R. Xiang: Metals, Vol. 8. 2018, 1024, https://doi.org/10.3390/met8121024

D. Hongjinng: Metals, Vol. 9. 2019, 74, https://doi.org/10.3390/met9010074

A. Tachieva: Metals, Vol. 9. 2019, 347, https://doi.org/10.3390/met9030347

A. Prosviryakov: Metals, Vol. 9. 2019, 218, https://doi.org/10.3390/met9020218

R. Rufini, O. Di Pietro, A. Di Schino: Metals, Vol. 8, 2018, 519, https://doi.org/10.3390/met8070519

M. Corradi, A. Di Schino, A. Borri, R. Rufini: Constr. Build. Mater., Vol. 181, 2018, p. 335

A. Borri, M. Corradi, G. Castrori, A. Molinari: Constr. Build. Mater. Vol. 211, 2019, p. 594, https://doi.org/10.1016/j.conbuildmat.2019.03.197

C. Gennari, M. Lago, B. Bögre, I. Mezaros, I. Calliari, L. Pezzato: Metals. Vol. 8, 2018, 1074; https://doi.org/0.3390/met8121074

A. Di Schino, M. Longobardo, G. Porcu. G. Turconi, L. Scoppio: NACE – International Conference Series 2006, 062151-06125114

A. Di Schino, M. Barteri, J.M. Kenny: Journal of Materials Science Letters, Vol. 22, 2003, p. 1511, https://doi.org/10.1023/A:1026155215111

A. Di Schino, J.M. Kenny, M. Barteri: Journal of Materials Science Letters, Vol. 22, 2003, p. 691, https://doi.org/0.1023/A:1023675212900

A. Di Schino: Acta Metallurgica Slovaca, Vol. 22, 2016, p. 266, https://doi.org/10.12776/ams.v22i4.815

M. Talha, C.K. Behera, O.P. Sinha: Mater. Sci. Eng. C, Vol. 33(7), 2013, p. 3563, https://doi.org/0.1016/j.msec.2013.06.002

Boulané‐Petermann, L., Biofouling, Vol. 10(4), 1996, p. 275

G. Bregliozzi, S.I.U. Ahmed, A. Di Schino, K.M. Kenny, H. Haefke: Tribol. Lett., Vol. 17, 2004, p. 697, https://doi.org/10.1007/s11249-004-8075-z

A. Di Schino, L. Valentini, J.M. Kenny, Y. Gerbig, I. Ahmed, H. Haefke: Surf. Coat. Technol., Vol. 161, 2002, p. 224, https://doi.org/10.1016/S0257-8972(02)00557-1

A. Di Schino, J.M. Kenny, G. Abbruzzese: J. Mater. Sci., Vol. 37, 2002, p. 5291, https://doi.org/10.1023/A:1021068806598

A. Di Schino, J.M. Kenny, I. Salvatori, G. Abbruzzese: J. Mater. Sci. , Vol. 36, 2001, p. 593, https://doi.org/10.1023/A:1004856001632

L. Valentini, A. Di Schino, J.M. Kenny, Y. Gerbig, H. Haefke: Wear , Vol. 253, 2002, p.458, https://doi.org/10.1016/S0043-1648(02)00140-0

C Zitelli, P. Folgarait, A. Di Schino: Metals, Vol. 9, 2019, 731, https://doi.org/10.3390/met9070731

Z. Brytan, M.A. Grande, M. Rosso, R. Bidulský, L.A. Dobrzański: Materials Science Forum, Vol. 672, 2011, p. 165, https://doi.org/10.4028/www.scientific.net/MSF.672.165

T. Kvačkaj, L.Sokolová, M. Vlado, V. Vrchovinský: High Temperature Materials and Processes, Vol. 24, 2005, Issue 2, p. 139, https://doi.org/10.1515/HTMP.2005.24.2.139

L. Parilak, E. Dudrova, R. Bidulsky, M. Kabatova: Powder Technology, Vol. 322, 2017, p. 447, https://doi.org/10.1016/j.powtec.2017.09.027

C. Wang, M. Wang, J. Shi, H. Dong, H: Scripta Materialia, Vol. 58, 2008, p. 492, D https://doi.org/10.1016/j.scriptamat.2007.10.053

S. Azuma, T. Kudo, H. Miyuki, M. Yamashita, H. Uchida: Corrosion Science, Vol. 46, 2004, p. 2265, https://doi.org/10.1016/j.corsci.2004.01.003

J. N. Wanklyn: Corrosion Science, Vol. 21, 1981, p. 211, https://doi.org/10.1016/0010-938X(81)90031-7

Y. Peng Y: Metals, Vol. 9, 2019, 723, https://doi.org/10.3390/met9070723

B. Atzori, P. Lazzarin, G. Meneghetti, M. Ricotta: Int. J. Fatigue, Vol. 31, 2009, p. 59, https://doi.org/10.1016/j.ijfatigue.2008.02.013

R. De Finis, D. Palumbo, F. Ancona, U. Galietti: Int. J. Fatigue, Vol. 74, 2015, p. 88, https://doi.org/0.1016/j.ijfatigue.2014.12.010




DOI: http://dx.doi.org/10.12776/ams.v25i4.1363

Refbacks

  • There are currently no refbacks.


SJR 2014: 0.502 - Q2 Metals and Alloys, 39./125.

SJR 2013: 0.309 - Q2 Metals and Alloys, 59./121.       

SJR 2012: 0.325 - Q2 Metals and Alloys, 33./90. (A)

SJR 2011: 0.363 - Q2 Metals and Alloys, 29./90. (A)

SJR 2010: 0.151 - Q3 Metals and Alloys, 68./90. (B)

SJR 2009: 0 - Q4 Metals and Alloys, 89./90. (C - according to the Slovak Journal Quality Criteria)

Indexed in: SCOPUS, Web of Science Core Collection, CROSSREF, GOOGLE SCHOLAR,CAMBRIDGE SCIENTIFIC ABSTRACTS, Committee on Publication Ethics (COPE)

IČO 00 397 610

EV 5174/15

p-ISSN 1335-1532, e-ISSN 1338-1156