Creation of Defects Catalogue for Nonconforming Product Identification in the Foundry Organization

Andrea Sütőová, Marko Grzinčič

Abstract

The paper deals with system of casting defects classification problematics and creation of defects catalogue in the foundry organization. There is described the value of correct defects classification and identification in the literature review and also some tools for defects classification are mentioned. Existing defects classifications and catalogues are often unusable for particular production processes and casting technology. Many foundries therefore create their own defects catalogues. The sample of created catalogue, which classifies and describes defects occuring in the aluminium foundry organization and its benefits are presented in the paper. The created catalogue primarily serves as a visual support for production operators and quality control processes.

References

Bolibruchová, D. and Grzin?i?, M., 2012. “Chyby hliníkových odliatkov odlievaných do kovových foriem”, in Proceedings of the International conference - Vyhne`12 Produktivní řízení slévarny, Vyhne, 25-26 September, pp. 110-122.

Elbel, T., et al., (1992). Vady odlítku se slítin železa – klasifikace, pří?iny a prevence, MATECS, Brno.

Frőhlich, L. and Kozel, Š., 2004. Atlas vád odliatkov, Košice: TU.

International Organization for Standardization, 2009. ISO/TS 16949:2009. Quality managment systems – Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations. Geneva: ISO.

International Organization for Standardization, 2005. ISO 9000:2005. Quality managment systems – Fundamentals and vocabulary. Geneva: ISO.

Mane, V. V., Sata, A. and Khire M.Y., 2010. “New approach to casting defect classification and analysis supported by simulation”, in Proceedings of The 59th Indian Foundry Congress, Chandigarh, February, pp. 87-104.

Slovenská technická norma/Slovak Technical Standard, 1964. STN 42 1240: 1964. Chyby odliatkov. Názvoslovie a triedenie chýb. SÚTN: Bratislava.

Tuttle, R.B., 2012. Foundry engineering: The Metallurgy and design of castings, CreateSpace.

Vijayaram, T. R., et al., 2006. “Foundry quality control aspects and prospects to reduce scrap rework and rejection in metal casting manufacturing industries”, Journal of Materials Processing Technology, Vol. 178, No. 1-3, pp. 39-43.

Zimwara D., et al., 2013. “Cost of Quality as a Driver for Continuous Improvement - Case Study – Company X”, International Journal of Innovative Technology and Exploring Engineering, Vol. 2, No. 2, pp. 132-139.

Authors

Andrea Sütőová
andrea.sutoova@tuke.sk (Primary Contact)
Marko Grzinčič
Sütőová, A., & Grzinčič, M. (2013). Creation of Defects Catalogue for Nonconforming Product Identification in the Foundry Organization. Quality Innovation Prosperity, 17(2), 52–58. https://doi.org/10.12776/qip.v17i2.238
Copyright and license info is not available

Article Details

No Related Submission Found