Development of a Variant Process-Planning Tool: A Case Study
Abstract
Purpose: This study addresses the development of a variant process planning tool, following the Knowledge-Based Variant Process Planning methodology, applied in a case study and presents the gains achieved.
Methodology/Approach: Case study supported by six steps: (1) Feature Analysis, (2) Knowledge Retrieval, (3) Inference, (4) Plan Adaptation, (5) Knowledge Update, and (6) Plan Validation/Optimisation..
Findings: The implementation of the Knowledge-Based Variant Process Planning tool led to significant improvements: planner time reduced by 70%, analyst workload by 90%, and process plan errors to 0%. Results show this approach significantly improves process planning in customised production.
Research Limitation/Implication: The limitations are associated with the specificity of the case study problem – the electric engine production systems.
Originality/Value of paper: This study helps fill the gap in case studies on the Variant Process Planning approach, specifically for electric engine production systems, paving the way for similar companies to adopt Knowledge-Based Variant Process Planning.
Full text article
References
Ali, M., Ali, H., Rizwan, H., Umer, M., Abdullah, H., Ullah, H., Rehman, S., and Khan, W., 2023. Variant process planning for a job shop. 2023 International Conference on Robotics and Automation in Industry (ICRAI), pp.1–4. doi:10.1109/icrai57502.2023.10089535.
Azevedo, J., Sá, J.C., Ferreira, L.P., Santos, G., Cruz, F.M., Jimenez, G., Silva, F.J.G.,2019. Improvement of Production Line in the Automotive Industry Through Lean Philosophy. Procedia Manufacturing, 41, pp. 1023-1030. doi.org/10.1016/j.promfg.2019.10.029
Bley, H. and Zenner, C., 2006. Variant-oriented assembly planning. CIRP Annals, 55(1), pp. 23–28. doi:10.1016/s0007-8506(07)60358-8.
Bubeník, P. and Horák, F., 2014. Proactive approach to manufacturing planning. Quality Innovation Prosperity, 18(1), pp. 23–32. doi:10.12776/qip.v18i1.208.
Campbell, T., Williams, C., Ivanova, O., Garrett, B., 2021. Could 3D printing change the world?. Strategic Foresight Report, Atlantic Council. Available at: https://www.atlanticcouncil.org/in-depth-research-reports/issue-brief/could-3d-printing-change-the-world/ (Accessed: 07 July 2025).
Cay, F. and Chassapis, C., 1997. An it view on perspectives of Computer Aided Process Planning Research. Computers in Industry, 34(3), pp.307–337. doi:10.1016/s0166-3615(97)00070-5.
Chougule, R.G. and Ravi, B., 2005. Variant process planning of castings using AHP-based nearest neighbour algorithm for case retrieval. International Journal of Production Research, 43(6), pp.1255–1273. doi:10.1080/00207540412331320517.
Craveiro, A., Lima, V., Santos, G., Sá, J.C., Lopes, M., Carvalho, J.D. 2023. Lean and Six Sigma Philosophies and Organizational Performance: A Study in Portuguese Laboratories. Quality Innovation Prosperity Journal 27 (1), pp. 21-45. doi: 10.12776/QIP.V27I1.1802
Gomes, F.S., Camargo, P.R., Reis, J.S. M., Diogo, G.M.M., Cardoso, R.P., Barros, J.G.M., Sampaio, N.A.S., Barbosa, L. C.F.M., Santos, G., 2022. The Main Benefits of Application of Six Sigma for Productive Excellence. Quality Innovation Prosperity Journal 26 (3), pp.1335-1745, doi: 10.12776/QIP.V26I3.1712
Ham, W., Kim, C. and Park, S., 2016. Template-based variant process planning for Manned Assembly Lines. International Journal of Computer Integrated Manufacturing, 30(9), pp. 958–969. doi:10.1080/0951192x.2016.1247992.
Khayrullina, M., Kislitsyna, O. & Chuvaev, A., 2015. Production systems continuous improvement modelling. Quality Innovation Prosperity, 19(2), pp.73–86. doi:10.12776/qip.v19i2.576.
Kumar, R., Kumar, M. and Chohan, J., 2021. The role of additive manufacturing for biomedical applications: A critical review. Journal of Manufacturing Processes, 64, pp. 828–850. doi:10.1016/j.jmapro.2021.02.022.
Kumar, S., 2018. Knowledge-based expert system in manufacturing planning: State-of-the-art review. International Journal of Production Research, 57(15–16), pp. 4766–4790. doi:10.1080/00207543.2018.1424372.
Murmura, F., Bravi, L., Santos, G. 2021. Sustainable Process and Product Innovation in the Eyewear Sector: The Role of Industry 4.0 Enabling Technologies. Sustainability 13(1), pp.365, https://doi.org/10.3390/su13010365
Nyamsuren, P., Lee, S., Hwang, H. and Kim, T., 2015. A web-based collaborative framework for facilitating decision making on a 3D design developing process. Journal of Computational Design and Engineering, 2(3), pp.148–156. doi:10.1016/j.jcde.2015.02.001.
Putnik, G. and Ávila, P., 2015. Special Issue Editorial: Mechanisms to Promote Continuous Improvement in Quality Management Systems. International Journal for Quality Research, 9(1), pp. 1-8.
Rebelo, M.F., Silva, R., Santos, G., Mendes, P., 2016. Model based integration of management systems (MSs)-case study. TQM Journal 28 (6), pp. 907-932, DOI: 10.1108/TQM-09-2014-0079
Sadaiah, M., Yadav, D., Mohanram, P. and Radhakrishnan, P., 2002. A generative computer-aided process planning system for prismatic components. The International Journal of Advanced Manufacturing Technology, 20(10), pp. 709–719. doi:10.1007/s001700200228.
Santos, G., Millán, A.L. (2013). Motivation and benefits of implementation and certification according ISO 9001 - the Portuguese experience. International Journal for Quality Research 7 (1), pp. 71-86, ISSN: 18006450.
Santos, G., Mandado, E., Silva, R., Doiro, M., 2019. Engineering learning objectives and computer assisted tools. European Journal of Engineering Education, 44 (4), pp.616-628, DOI: 10.1080/03043797.2018.1563585
Santos, G., Rebelo, M., Barros, S., Silva, R., Pereira, M., Ramos, G., Lopes, N., 2014. Developments regarding the integration of the occupational safety and health with quality and environment management systems. Book Chapter of Occupational Safety and Health, Nova Science publisher, pp.113–146.
Santos, G., Carvalho, S., Sá, J.C., Luis P. Ferreira, L.P., 2023. The Importance of Patent Registration in the Way of Generating Wealth for Nations. Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems – FAIM 2023. Lecture Notes in Mechanical Engineering, pp. 848–855
Silva, S., Sá, J.C., Silva, F.J.G., Ferreira, L.P., Santos, G., 2020. Lean Green—The Importance of Integrating Environment into Lean Philosophy—A Case Study. Lecture Notes in Networks and Systems 122, pp. 211–219, doi.org/10.1007/978-3-030-41429-0_21
Slancová, I. and Plura, J., 2024. Information inputs and outputs of quality planning processes and the possibilities of their improvement through digital transformation. Quality Innovation Prosperity, 28(2), pp. 76–98. doi:10.12776/qip.v28i2.2023.
Sun, Z., Doiro, M., José Carlos Sá, J.C., Santos, G., 2023. Shaping the Conscious Behaviors of Product Designers in the Early Stages of Projects: Promoting Correct Material Selection and Green Self-Identity through a New Conceptual Model. Sustainability 15(19), pp.14463, doi.org/10.3390/su151914463
Talapatra, S., Santos, G., Gaine, A., 2022. Factors Affecting Customer Satisfaction in Eatery Business - an Empirical study from Bangladesh. International Journal for Quality Research 16(1), pp. 163–176, doi.org/10.24874/IJQR16.01-11
Varela, L., Ávila, P., Castro, H., Putnik, G.D., Fonseca, L. and Ferreira, L., 2022. Manufacturing and management paradigms, methods and tools for sustainable industry 4.0-oriented manufacturing systems. Sustainability, 14(3), pp. 1574. doi:10.3390/su14031574.
Vieira, T., Sá, J.C., Lopes, M.P., Santos, G., Félix, M., J., Ferreira, L.P., Silva, F.J.G., Pereira, M.T., 2019. Optimization of the cold profiling process through SMED. Procedia Manufacturing 38, pp. 892–899, doi.org/10.1016/j.promfg.2020.01.171
Xu, X., Wang, L. and Newman, S., 2011. Computer-aided process planning – a critical review of recent developments and future trends. International Journal of Computer Integrated Manufacturing, 24(1), pp. 1–31. doi:10.1080/0951192x.2010.518632.
Yülek, M.A., Santos, G., 2022. Why Income Gaps Persist: Productivity Gaps,(No) Catch-up and Industrial Policies in Developing Countries. Journal of Economic Issues, 56 (1), pp. 158-183. doi: 10.1080/00213624.2022.2020579
Zhang, H.-C. and Alting, L., 1994. Computerized Manufacturing Process Planning Systems. London: Chapman & Hall.
Zgodavova, K., Petrik, J., Solc, M., 2014. Principles, Concepts, Standards of Management Systems – Quality Metrology, Information Security. Lap Lambert Academy Publishing. Saarbrücken, Germany.
Zgodavova, K.; Bober, P.; Majstorovic, V.; Monkova, K.; Santos, G.; Juhaszova, D., 2020. Innovative methods for small mixed-batch production system improvement: The case of a bakery machine manufacturer. Sustainability (Switzerland), 12, pp. 6266. doi.org/10.3390/su12156266
Authors
Copyright (c) 2025 Paulo Ávila, Bebiana Santos , Alzira Mota , Hélio Castro , Luís Pinto Ferreira , João Bastos , José Carlos Sá , Joaquim Moreira , António Duarte Santos , Gilberto Santos
This work is licensed under a Creative Commons Attribution 4.0 International License.
This is an open access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the BOAI definition of open access. This journal is licensed under a Creative Commons Attribution 4.0 License - http://creativecommons.org/licenses/by/4.0.
Authors who publish with the Quality Innovation Prosperity agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.